Oct 31, 2023

Complete Guide of How to Fix a Burnt Coil in Your Disposable Vape

Are you tired of that unpleasant burnt taste ruining your vaping experience? LOST MARY has the ultimate quick guide to help fix a burnt coil in your disposable vape. Whether you're a seasoned vaper or just starting, this blog post will walk you through easy steps to bring back the delicious flavors and smooth hits you crave.

Introduction to Disposable Vapes and Burnt Coils

Disposable vapes have become increasingly popular in recent years due to their convenience and ease of use. These compact electronic cigarettes come pre-filled with e-liquid and a built-in battery, making them the perfect option for on-the-go vaping. However, one downside to disposable vapes is that they are prone to burnt coils.

A burnt coil occurs when the wicking material within the coil becomes dry or overheated, resulting in a harsh and unpleasant taste. This can happen for various reasons, such as insufficient time for the wick to saturate between puffs or using sweetened e-liquids that can caramelize on the coil.

While disposable vapes are meant to be used until they run out of e-liquid or battery life, a burnt coil can significantly decrease the overall lifespan of your device. Therefore, LOST MARY will walk you through everything you need to know about fixing a burnt coil in your disposable vape, from identifying signs of a burnt coil to troubleshooting techniques and preventive measures!

Signs of a Burnt Coil in Your Disposable Vape

in your disposable vape.

Unpleasant Taste

One of the most obvious signs of a burnt coil in your disposable vape is the unpleasant taste it produces. Instead of enjoying the delicious flavor of your e-liquid, you may notice a harsh and bitter taste that can irritate your throat and lungs. This occurs when the coil overheats and burns the wick inside, causing it to produce an unpleasant flavor.

Decreased Vapor Production

A properly functioning disposable vape should produce a decent amount of vapor with each puff. However, if you notice a drastic decrease in vapor production, it could be due to a burnt coil. When the coil is burnt, it cannot heat up efficiently and, therefore, can't produce enough vapor.

Dark or Burnt-Looking Wick

Another tell-tale sign of a burnt coil is when you inspect the wick inside your disposable vape and notice it has turned dark or black. This discoloration indicates that the wick has been burned from heating too much or too long.

Gurgling Sounds

If you hear a gurgling sound when you take a puff from your disposable vape, it could be a sign of a burnt coil. The e-liquid pooling in the coil causes this sound due to the wick being unable to absorb it, resulting in gurgling noises properly.

Difficulty Inhaling

When your disposable vape has a burnt coil, it can also affect the airflow and make inhaling difficult. This is because the burnt wick can clog up the airflow holes, making it harder for air to pass through and for you to take a smooth hit.

Steps to Fix a Burnt Coil in Your Disposable Vape

When you find your disposable vape experiencing a burnt taste, there is no need to panic, as there are steps to fix a burnt coil in your disposable vape and get back to enjoying a smooth vaping experience. In this section, we will outline the steps you can follow to fix a burnt coil in your disposable vape.

1. Disassemble the Device

Disassembling a disposable vape device may initially seem intimidating, but it is a relatively simple process. This step is crucial in fixing a burnt coil as it allows you to access and replace it with a new one.

Step 1: Gather Your Tools

Before starting the disassembly process, make sure you have all the necessary tools on hand. These include a pair of tweezers, a small screwdriver, cotton swabs or Q-tips, and rubbing alcohol. Having these tools ready will make the disassembly process smoother and more efficient.

Step 2: Remove the Mouthpiece

The first step in disassembling your disposable vape device is to remove the mouthpiece. Most disposable vapes have a removable mouthpiece that can be easily pulled out or twisted off. However, some devices may require unscrewing or using a tool to pry it open. Once removed, set aside the mouthpiece in a safe place that won't get dirty or lost.

Step 3: Unscrew/Remove Battery Cover

Next, locate and remove the battery cover of your disposable vape device. This step may vary depending on the type and model of your device. Some devices have screws that need to be unscrewed, while others are snapped into place and can be removed by prying them open with a tool.

Step 4: Take Out Battery

Once you have removed the battery cover, gently take out the battery from its compartment. Be careful not to damage the battery or any other components inside the device.

Step 5: Remove Tank/Cartridge

After removing the battery, you can now access the tank or cartridge of your disposable vape. If your device has a removable tank, unscrew it from the battery and set it aside. For devices with integrated tanks, you may need to use a tool to pry it open and remove it from the battery.

Step 6: Remove Coil

With the tank or cartridge removed, you can now access the coil of your disposable vape. Using tweezers or your fingers, carefully pull out the burnt coil from its designated compartment.

Congratulations! You have successfully disassembled your disposable vape device. Now it's time to replace the burnt coil with a new one and assemble everything.

2. Clean the Coil

Cleaning the coil is an essential step in fixing a burnt coil in your disposable vape. Over time, the buildup of gunk and residue on the coil can lead to a burnt taste and decrease its overall performance. By regularly cleaning your coil, you can prolong its lifespan and ensure a better vaping experience.

Here are the steps to follow when cleaning the coil of your disposable vape:

Disassemble Your Vape

Before you begin cleaning, make sure to disassemble your disposable vape. This includes removing the tank, mouthpiece, and battery if possible. This will give you easy access to the coil for thorough cleaning.

Rinse with Warm Water

The first step in cleaning your coil is to rinse it with warm water. This will help loosen any built-up dirt or residue on the coil's surface. Do not use hot water, which can damage or warp the coils.

Soak in Vinegar Solution

For tougher buildup on the coils, you can create a vinegar solution by mixing equal parts of white vinegar and water in a bowl. Place your coil in this solution for about 30 minutes to allow it to soak.

Scrub with Toothbrush

After soaking, use a soft-bristled toothbrush to scrub off any remaining residue on the coils gently. Be careful not to apply too much pressure, which could damage or break the delicate coils.

Or Use Isopropyl Alcohol (IPA)

Another effective method is using IPA (Isopropyl Alcohol) to clean the coils. Soak the coil in a bowl of IPA for 30 minutes, then rinse it with warm water and allow it to dry entirely before reassembling your disposable vape.

he rechargeable disposable vape system.

3. Prime the Coil with E-liquid

Once you have identified that your disposable vape coil is burnt, the next step is to prime it with e-liquid. This process involves saturating the coil with e-liquid to ensure proper wicking and prevent dry hits.

Drip e-liquid onto wicking holes. The wicking holes are small openings located on either side of the coil or in between its wraps (depending on its design). Using your bottle of e-liquid, slowly drip a few drops onto each hole until they are visibly saturated but not overflowing.

Drip e-liquid onto the top of the coil. Next, take your bottle of e-liquid and gently drip some drops directly onto the top of the coil (the part that heats up). This will help ensure that all parts of the coil are properly saturated.

Reassemble the tank and fill it with e-liquid. If you removed the old coil, reattach it to the tank. Then, fill the tank with e-liquid through the fill holes (if your disposable vape has them) or by removing the mouthpiece and filling directly into the tank.

Let it sit for a few minutes. Once your tank is filled with e-liquid, let it sit for a few minutes to allow the coil to absorb the liquid fully.

4. Reassemble and Refill the Device

Reassembling and refilling your disposable vape device is the final step in fixing a burnt coil. This process involves putting all the components back together and filling the tank with fresh e-liquid. Here's a step-by-step guide to help you through this process:

1. Clean any residue

2. Check for damages

3. Reattach the mouthpiece

4. Replace O-rings (if necessary)

5. Fill up your tank

6. Prime your coil (Before using your device again, prime your new coil by adding a few drops of e-liquid directly onto the exposed cotton.)

7. Reattach the tank

8. Let it sit

9. Vape away

Remember, if you start to experience a burnt taste again, it may be time to replace your disposable vape device, as the battery or other components may be damaged beyond repair.

Prevention Tips to Avoid Burnt Coils in Disposable Vapes

Disposable vapes offer a hassle-free experience, as there is no need for refilling or changing coils. However, like any other vaporizer, disposable vapes can also suffer from burnt coils. This unpleasant taste is often caused by improper use or neglect of the device.

In this section, we will discuss some prevention tips that can help you avoid burnt coils in your disposable vape.

1. Prime Your Coil Before Use

Before using your disposable vape for the first time, it is essential to prime the coil properly. This involves saturating the wick with e-liquid to prevent it from burning when heated. Add a few drops of e-liquid onto the coil and let it sit for about 10 minutes before vaping.

2. Avoid Chain Vaping

Chain vaping refers to taking multiple puffs in quick succession without giving the coil enough time to cool down and re-saturate with e-liquid. This can lead to dry hits and eventually result in a burnt coil. To avoid this, take short breaks between each puff and allow the coil to rest for at least 30 seconds before taking another hit.

3. Don't Overfill Your Device

One common mistake that many vapers make is overfilling their disposable vapes. When filling up your device, stay within the maximum fill line indicated on the pod or tank. Overfilling can cause e-liquid to leak into the airflow holes and flood the coil, resulting in a burnt taste.

4. Store Your Device Properly

Proper storage of your disposable vape can also help prevent burnt coils. Keep your device away from direct sunlight and extreme temperatures, as these can cause the e-liquid to thin out and leak into the coil, leading to a burnt taste.

5. Use High-Quality E-Liquid

Using low-quality or expired e-liquids can also contribute to burnt coils. These liquids often contain impurities and sweeteners that can clog up the wick and result in a burnt taste. Always use high-quality, reputable e-liquids that are compatible with your disposable vape.

In conclusion, by following these prevention tips, you can avoid burning your coils in disposable vapes and enjoy a smooth vaping experience every time. It is also essential to regularly clean your device and replace it when needed to ensure optimal performance.

Other Common Issues with Disposable Vapes and How to Fix Them

Disposable vapes, like any electronic device, can encounter various performance issues. While disposable vapes are designed for single use and are not typically repairable, there are some common issues that users may experience and potential troubleshooting steps to try. Here are a few common issues with disposable vapes and some suggestions on how to address them:

Device Not Firing

If your disposable vape is not producing vapor when you inhale or the LED light does not activate, it may indicate a connection issue or a depleted battery. Here are some troubleshooting steps:

1. Ensure that the device is fully charged if it has a built-in battery (though most disposable vapes are pre-charged).

2. Check for any blockage in the airflow path, such as clogged air holes or a blocked mouthpiece.

3. Verify that you are using the device correctly. Some disposable vapes have an activation button that needs to be pressed while inhaling.

Weak or No Vapor Production

If you are not getting sufficient vapor or the flavor seems weak, it could be due to a few factors:

1. Ensure that the device has enough e-liquid remaining.

2. Check the airflow. If the airflow holes are partially blocked, it can restrict vapor production.

3. If the device has adjustable airflow, ensure that it is set to your preferred airflow setting.

Leaking or Spitback

Leaking or spitback (hot e-liquid popping into your mouth) can occur with disposable vapes, although they are generally designed to minimize these issues. Here are some steps to address these problems:

1. Check the mouthpiece for any e-liquid buildup or residue.

2. Avoid over-puffing or taking excessively long drags, as it can lead to flooding and leaking.

3. Store the disposable vape upright whenever possible to minimize the chances of leaks.

No Flavor or Burnt Taste

If you are not getting any flavor or experiencing a burnt taste, it could be due to the following reasons:

1. Ensure that the e-liquid level is sufficient. If it is running low, it may result in a diminished flavor or a burnt taste. Replace the disposable vape if it's empty.

2. If you have been using the device for an extended period, it may be reaching the end of its lifespan. Disposable vapes are designed for a limited number of puffs, and the flavor quality may degrade over time.

It's important to note that disposable vapes are intended for single use and are generally not designed to be repaired or extensively troubleshooted. If you encounter persistent issues, contacting the manufacturer's customer support or replacing the disposable vape may be the best action.